McPherson African Wenge/Redwood Acoustic Electric Guitar

Combine exquisite craftmanship and cutting edge guitar design and you have McPherson Guitars. Featuring their revolutionary offset soundhole technology, state of the art bracing, and their unique "no-touch" cantilevered neck design. Collectively, these technologies allow the top of the instrument to vibrate and resonate to it's fullest potential.

Similar to Cedar; the Redwood top is warm, rich, and complex. It exhibits a less pronounced bass and more headroom than Cedar. Wenge is a dense, dark-colored African hardwood (unrelated to other rosewoods), that has tonal properties remarkably similar to those of Brazilian rosewood.

Depth at the tail block is 4 inches. As on all McPhersons, the depth at the neck block is 4 inches.

All McPherson® guitars include the following unless otherwise specified:
 
- Scale length: 25 1/2 inches
- Upper bout: 11 1/8 inches
- Waist: 10 1/4 inches
- Lower bout: 16 inches
- Body length: 20 1/8 inches
- Overall length: 41 1/2 inches
- Neck width: Standard 1 3/4 inch @ nut, 2 5/32 inch @ 12th
- Wide 1 7/8 inch @ nut, 2 5/32 inch @ 12th
- String spacing: E to E - 2 3/16 inches
- Offset sound hole.
- Cantilevered neck.
- Truss Rod: Non-adjustable, unidirectional high-modulus carbon fiber
- Ebony bridge
- Ebony bridge pins: Unslotted with mother of pearl dot
- Fingerboard: Ebony with 14 inch radius
- Nut: Natural Bone
- The Buzz Feiten intonation system
- Three custom bone saddles set up for low, med, and tall action
- Binding: Flamed Koa
- Electronics: L.R. Baggs RTS2 system
- Ribbon transducer pick-up, pre-amp and volume control
- Tuners: Schaller M6G Gold Tuning machines
- Gold strap button
- Case: Custom fit Ameritage case with built in humidification system
- Inlay: McPherson® mother of pearl inlay on head cap and mirror image on bridge plate.
- Finish: Lawrence-McFadden UV finish.
- Strings: Elixir Nanoweb medium gauge